Handstand canes on ring base with rotation

Description

Acrobatic handstand canes on ring base with rotation

Canes are a good prop for advancing your hand balance practice.

These handstand canes are perfect for your personal training and circus performances.

• Three canes are placed on a round wooden platform.
• Acrobatic canes are screwed to the platform with four bolts and special built-in nuts in the platform.
• Canes are easily disassembled and disconnected from the platform, using the hex wrench that comes with the kit.
• Blocks are made from alder or oak.
• It is possible to manufacture blocks according to individual size.
• Steel canes are made from thick-walled steel pipe.
• Painted with polymer coating.

Blocks can be:

1. Turn to both directions and fixing  – free rotation without bearing with the ability to fix by pressing a bolt or using an automatic latch.
2. Turn in one direction and fixing – free rotation due to a special bearing with the ability to fix by pressing a bolt or automatic latch.

Attention! The price is for spinning one block. If it is necessary to rotate two or three blocks, the cost will be recalculated.

Extra spin cost:

Rotation in one direction: + 60€.

Rotation in both directions: +50€.
Automatic fixing: + 35€.

Recommended block size:

• For teenagers – 4/8/13 cm.
• For adults – 4/9/14 cm or under the order.
• It is also possible to make blocks with a slope.
• Standard width between canes, from the center of the block – 35 cm (or on request)

Acrobatic stands are securely screwed to the platform and they are stable.

• The platform is made of moisture-resistant laminated plywood.
• The standard platform diameter is 80 cm.
• Cane height: 45 – 80 cm.

It is possible to manufacture circus canes and stands for equilibra according to your parameters and wishes.